No problemo. Sounds like a good job for a nice sharp handplane.
No problemo. Sounds like a good job for a nice sharp handplane.
3/8" thick crossgrain splines. They are connecting the tiles together, and there is a spline around the perimeter of the panel that is plowed into the stiles and rails.
Me! I learned from a guy who’d been building doors for 40 years, and continue the tradition of mortise and tenon with cope and stick construction professionally.
Flood that section with thin cyanoacrylate glue, then use a caul( flat board with plastic on the face to keep it from gluing itslf to the table) to press it down. If you dont have clamps that deep, use 2x2s to span over the caul and clamp both ends of each stick. Let it dry overnight. Don’t use accelerator on the glue. In the future, glue the veneer down before sanding.
Find someone with a Tormek sharpening system with the woodturners kit, and beg to use their Swedish shapening marvel.
Pure tung oil. I’ve also had nice results with 1/3 tung oil 1/3 polyurethane, and 1/3 mineral spirits. Makes a nice wipe on finish that’s forgiving. Pure tung oil is by far my favorite, in good part because ot can be touched up in one spot, or recoated with no evidence of repair or need for stripping. Great protection, and it brings out a depth of the natural beauty ofnthe grain thays just unmatched by any other finish.
If the veneer is what’s bubbling, you need to get it glued back down before a light sanding. A thin cyanoacrylate (super-glue) can work well for this, especially if you make tiny slices with a utility knife in each bubble before applying the glue. The thin stuff will wick into the bubbles, and then you can press em down with a caul (flat piece of wood) covered with plastic to keep it from being glued to the veneer, and some clamps for pressure. Let it dry overnight, don’t use accelerator. Lightly sand and refinish.
Take care of yourself so that you may care for others. Get out of there. Just because they’re family doesnt mean they’re good for you. You deserve better than to be mistreated. You deserve dignity and respect. It will be hard, but most things in life worth doing are. Best wishes.
“On reaching Jerusalem, Jesus entered the temple courts and began driving out those who were buying and selling there. He overturned the tables of the money changers and the benches of those selling doves”
Sounds like losing his shit with the capitalists to me.
It’s because the demons fly out of you when you sneeze, and you need to be blessed to prevent them from getting back in, or so they thought back in Black Plague days.
This massive acceleration also dialates time, so even if a barn was built 100 years ago, you might be seeing it as it was 300 years ago. This is why barns often also look so old.
Drainage.
No, no. It’s not like he’d have access to launching the nukes or anything. Checks Notes Oh Shiiiiiit
This is The Way.
Preach on, Brother!!! Mmmmmmhhhhmmm. I know that’s right.
Aw shucks, that’s not even half my handscrews. I do whenever I’m doing hand rail for a curved staircase. That’s an every clamp in the shop clamped on and still seeing a few spots that could stand one more kinda situation.
Thank you!
Thank you!
Thank you!
Get a rabbet plane, and keep it sharp.